Change a car tire on a No-Mar scratch proof tire changer
Август 17, 2009
Change a BMW car tire on a No-Mar scratch proof tire changer. For more videos, pricing and other 'how-to' tips on changing motorcycle tires, go to www.nomartirechanger.com
1492 116
853,814 просмотров
Manual Wheel / Tyre changer tool DIY and wobble repair
Wheel-tool, change your own tire from rim.
10-10-2013 After balancing with dynabeads with several wheels over time, no good results, can't advise it.
Also lateral unbalance can't be fixed with the beads.
Woble repair from steel wheel (rim): — Measure the lateral runout at the rim where tire is mounted and mark this place. — When inside and outside are at the same spot, it can be fixed — If this is 2mm, then you can grind with angle-grinder about.8mm on the side marked from the surface where the rim is mounted to the verhicle. — You should be very experienced with the angle_grinder, as the surface must be plane ofcourse. — When mounting the tire: pump it with air till max. what's written on the tire (is important), put the valve and reduce till what you normal drive with.
I was able to reduce the wobble with 50% measured at a steel rim. Measured at the mounted tire later, it was reduced about 70%.
No more vibrations at 100-120km/h, as this is what lateral runout does.
http://youtu.be/TodlFTIqXn4
677 85
самодельный ручной шиномонтажный станок
Сделал за два дня с поиском материалов.
5732 251
1万円以下の手動タイヤチェンジャーを買ってみた
安かったので買ってみた。タイヤが柔らかければ、そこそこ使えるみたい。(^ω^) Sタイヤは硬すぎて無理～(笑) ヤフオクだとさらに安い！https://auctions.yahoo.co.jp/search/search; _ylt=A7dPDjekfVtZ1EcA6VhAPDh8?p=タイヤチェンジャー 15～21インチ&aq=-1&oq=&x=37&y=25&fixed=0&ei=UTF-8&tab_ex=commerce&auccat=&slider=0
1995 878
Desmontadora de pneus manual
Desmontadora de pneus manual três em um
Fone:(055)91020125
Acesse http://maxximamaquinas.blogspot.com.br/
372 28
Tool Review No Mar Mount Dismount Bar and YELLOWTHING®
Tool Review No Mar Mount Dismount Bar and YELLOWTHING®
I review a few tool to help manually mount and dismount your own tires with out damaging your nice rims.
tools can be purchased bellow
MOUNT / DEMOUNT BAR https://www.nomartirechanger.com/Mount_Demount_Bar_p/tc-mdbar.htm
YELLOWTHING® BEAD KEEPER TOOL https://www.nomartirechanger.com/YellowThing_Tire_Tool_p/ac-yellowthing.htm
TIRE LUBE PASTE https://www.nomartirechanger.com/Tire_Lube_Paste_1_Pint_Jar_p/sp-lube-pint.htm
Tee Shirt Store https://teespring.com/stores/asekens-store
Flash Me T-Shirt https://teespring.com/flashmeobd2#pid=2&cid=2122
93 7
How To Mount and Balance A Tire -EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
I often get asked how to mount and balance a tire with tools at home and the truth is that's WAYYY too hard. It's much better and easier to use the equipment that was designed for it. In this video I show exactly that, how to use the proper equipment to mount and balance a tire. It's not terribly exciting but I do show some things that are necessary when performing this work on an aluminum wheel. You MUST clean the bead area before you mount a new tire onto an aluminum wheel or else it will forever leak at the bead. I say this because all too often I see a tire that leaks air that's just been installed where the rim was not cleaned. Enough of my soap box. Also this video only covers the 'basic' tire mount and balance. When it comes to low profile or large tires it's a bit more complicated. As far as tires go these are pretty easy and straightforward.
I'd like to thank my friend Scott Armstrong for his assistance and for letting us film in his garage. If you're in the Cincinnati area and looking for auto repair work I suggest you contact him as he's a heck of a mechanic.
Armstrong Automotive: 513-939-3903
email: [email protected]
Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/42849-how-to-mount-and-balance-a-tire#44974
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
4116 144
R&R Beadbreaker & Tyre Refitting Tool Hub adapter for aluminium rims with no off set
R&R Beadbreaker & Tyre Refitting Tool Hub adapter for alloy rims with no off set
How to make the R&R bead breaker fit the late model alloy rims.
302 115
Removing tire using old school tire machine by: Karn M.
Removing tire using old school (Coats 40-40) tire machine.
479 46
Manual Tyre Changer
Tyrepliers Manual Tyre Changer
www.tyrepliers.com.au
4437 391
CNC Rim Repair at Fix My Rim Inc.
Papo shows you the steps on how he repairs a CNC or Machined rim. Complete with before and after shots of the damaged rim. All work done on premises at Fix My Rim Inc. We welcome new business accounts. We are located at 103-08 219th Street, Queens Village, NY 11429. 718-776-4114.
4320 850
